다운로드 Microsoft : MO-201 질문 & 답 PDF & Test Software

SIMULATION
Instructions
Exam Environment
Exam Interface and Controls
The exam panel provides access to the project task(s). Each project has an associated file in which you will perform the project tasks.

1. Project file
2. Split bar
3. Exam panel
You can modify the exam interface to fit your needs in the following ways:
* To increase or decrease the exam panel font size, press Ctrl+Plus or Ctrl+Minus.
* To change the height of the exam panel, drag the split bar between the project file and the exam panel.

* To restore the interface to the default appearance, click the Restore button near the upper-right corner of the exam panel.

4. The Information bar at the top of the exam panel displays the current project and total number of projects, the remaining exam time, and the following commands:
* Collapse Panel. Minimizes the exam panel to provide more space for the project file.
* Restart Project. Closes and reopens the current project file without saving your changes.
* Submit Project. Saves your changes, submits the project file, and moves to the next project.
* Calculator. A calculator is available in some exams. You are not required to use the calculator.
* Restore. Restores the size and position of the project file and exam panel to the defaults.
* Help. Displays information about the exam interface.
5. The Content area displays the task tabs and the current task description.
6. The Navigation area at the bottom of the exam panel contains the following commands.
* Previous Task/Next Task. Saves your response and moves to the previous or next task in the current project.
* Leave feedback after exam. Flags the task to indicate that you want to leave feedback about it after the exam.
* Mark for review. Flags the task to indicate that you want to return to it before you finish the exam.
* Mark as complete. Flags the task to indicate that you feel you have completed the task.
In projects that contain multiple tasks, you can switch between tasks by clicking the task tab, Next Task button, or Previous Task button.
End of the instructions.
On the "Volunteer Analysis" chart sheet, drill down into the data to display the number of volunteer hours for each month.

• A. If a chart has multiple fields in the Axis box, you set it to show levels and you see only one level at a time, starting with the top level.
  To enable drill-down, access the Design tab > Show Levels > Enable Drill Down One Level at a Time.
  if you double-click on one of the bars, you will see the bars for the underlying data.
• B. If a chart has multiple fields in the Axis box, you set it to show levels and you see only one level at a time, starting with the top level.
  To enable drill-down, access the Design tab < Show Levels < Enable Drill Down One Level at a Time.
  if you double-click on one of the bars, you will see the bars for the underlying data.

SIMULATION
Instructions
Exam Environment
Exam Interface and Controls
The exam panel provides access to the project task(s). Each project has an associated file in which you will perform the project tasks.

1. Project file
2. Split bar
3. Exam panel
You can modify the exam interface to fit your needs in the following ways:
* To increase or decrease the exam panel font size, press Ctrl+Plus or Ctrl+Minus.
* To change the height of the exam panel, drag the split bar between the project file and the exam panel.

* To restore the interface to the default appearance, click the Restore button near the upper-right corner of the exam panel.

4. The Information bar at the top of the exam panel displays the current project and total number of projects, the remaining exam time, and the following commands:
* Collapse Panel. Minimizes the exam panel to provide more space for the project file.
* Restart Project. Closes and reopens the current project file without saving your changes.
* Submit Project. Saves your changes, submits the project file, and moves to the next project.
* Calculator. A calculator is available in some exams. You are not required to use the calculator.
* Restore. Restores the size and position of the project file and exam panel to the defaults.
* Help. Displays information about the exam interface.
5. The Content area displays the task tabs and the current task description.
6. The Navigation area at the bottom of the exam panel contains the following commands.
* Previous Task/Next Task. Saves your response and moves to the previous or next task in the current project.
* Leave feedback after exam. Flags the task to indicate that you want to leave feedback about it after the exam.
* Mark for review. Flags the task to indicate that you want to return to it before you finish the exam.
* Mark as complete. Flags the task to indicate that you feel you have completed the task.
In projects that contain multiple tasks, you can switch between tasks by clicking the task tab, Next Task button, or Previous Task button.
End of the instructions.
On the "Sales Conference" worksheet, configure cells A4:A12 to allow only whole numbers from 1 to 9. Otherwise, display a Stop error with the title "Invalid" and the message "1 to 9".

• A. 1. Select the cell(s) you want to create a rule for.
  
  2. Select Data >Data Validation.
  3. On the Settings tab, under Allow, select an option:
  Whole Number - to restrict the cell to accept only whole numbers.
  Decimal - to restrict the cell to accept only decimal numbers.
  List - to pick data from the drop-down list.
  Date - to restrict the cell to accept only date.
  Time - to restrict the cell to accept only time.
  Text Length - to restrict the length of the text.
  Custom - for custom formula.
  4. Under Data, select a condition:
  between
  not between
  equal to
  not equal to
  greater than
  less than
  greater than or equal to
  less than or equal to
  5. On the Settings tab, under Allow, select an option:
  6. Set the other required values, based on what you chose for Allow and Data. For example, if you select between, then select the Minimum: and Maximum: values for the cell(s).
  7. Select the Ignore blank checkbox if you want to ignore blank spaces.
  8. If you want to add a Title and message for your rule, select the Input Message tab, and then type a title and input message.
  9. Select the Show input message when cell is selected checkbox to display the message when the user selects or hovers over the selected cell(s).
  10. Select OK.Now, if the user tries to enter a value that is not valid, a pop-up appears with the message, "This value doesn't match the data validation restrictions for this cell."
• B. 1. Select the cell(s) you want to create a rule for.
  
  2. Select Data >Data Validation.
  3. On the Settings tab, under Allow, select an option:
  Whole Number - to restrict the cell to accept only whole numbers.
  Decimal - to restrict the cell to accept only decimal numbers.
  List - to pick data from the drop-down list.
  Custom - for custom formula.
  4. Under Data, select a condition:
  between
  not between
  equal to
  less than or equal to
  5. On the Settings tab, under Allow, select an option:
  6. Set the other required values, based on what you chose for Allow and Data. For example, if you select between, then select the Minimum: and Maximum: values for the cell(s).
  7. Select the Ignore blank checkbox if you want to ignore blank spaces.
  8. If you want to add a Title and message for your rule, select the Input Message tab, and then type a title and input message.
  9. Select the Show input message when cell is selected checkbox to display the message when the user selects or hovers over the selected cell(s).
  10. Select OK.Now, if the user tries to enter a value that is not valid, a pop-up appears with the message, "This value doesn't match the data validation restrictions for this cell."

SIMULATION
Instructions
Exam Environment
Exam Interface and Controls
The exam panel provides access to the project task(s). Each project has an associated file in which you will perform the project tasks.

1. Project file
2. Split bar
3. Exam panel
You can modify the exam interface to fit your needs in the following ways:
To increase or decrease the exam panel font size, press Ctrl+Plus or Ctrl+Minus.
To change the height of the exam panel, drag the split bar between the project file and the exam panel.

To restore the interface to the default appearance, click the Restore button near the upper-right corner of the exam panel.

4. The Information bar at the top of the exam panel displays the current project and total number of projects, the remaining exam time, and the following commands:
* Collapse Panel. Minimizes the exam panel to provide more space for the project file.
* Restart Project. Closes and reopens the current project file without saving your changes.
* Submit Project. Saves your changes, submits the project file, and moves to the next project.
* Calculator. A calculator is available in some exams. You are not required to use the calculator.
* Restore. Restores the size and position of the project file and exam panel to the defaults.
* Help. Displays information about the exam interface.
5. The Content area displays the task tabs and the current task description.
6. The Navigation area at the bottom of the exam panel contains the following commands.
* Previous Task/Next Task. Saves your response and moves to the previous or next task in the current project.
* Leave feedback after exam. Flags the task to indicate that you want to leave feedback about it after the exam.
* Mark for review. Flags the task to indicate that you want to return to it before you finish the exam.
* Mark as complete. Flags the task to indicate that you feel you have completed the task.
In projects that contain multiple tasks, you can switch between tasks by clicking the task tab, Next Task button, or Previous Task button.
End of the instructions.
On the "Summary" worksheet, starting in cell A4, consolidate data from the 2014-2018 "by Region" worksheets. Display the average number of the "Recreation Visits" for each "Region". Use labels in both the top row and left column.
Delete the blank "Park Name" column from the consolidated data.

• A. * Open the worksheets you want to consolidate.
  * Ensure the data in each spreadsheet is listed in a consistent format. Make sure the labels on each spreadsheet are listed in a consistent format. For example, if you have the date listed in the top row, and the product listed in the left column, make sure this is the same format for each spreadsheet. Make sure the rows and columns are in the same location for each spreadsheet. Delete any blank rows or columns in the spreadsheets.
  * Open a the "Summary" worksheet.
  * Click the cell that you want the consolidated rows and/or columns to start. Click the row and/or column that is consistent with where the tables are located in the other spreadsheets.
  * Click Data. It's in the menu bar at the top of Excel. This displays the Data panel at the top of the page.
  * Click the Consolidate icon. It's the icon that resembles two sheets with a blue arrow in between them pointing to a blue third sheet. This opens the consolidate menu.
  * Select a function. Use the drop-down menu below "Function" to select the method that the data will be consolidated. For example, if you want to add all the data together, select Sum. You can also select Count, Average, Min, Max and other functions.
  * Select a reference source. This is the first spreadsheet that you want to consolidate. If you want to consolidate sheets within the same file, click the arrow icon to the right of the bar below "References".
  * Highlight the data you want to consolidate. If you are consolidating data from a separate sheet within the same file, click and drag to highlight data and labels you want to consolidate. This will display sheet name followed by an exclamation mark followed by the row and column range in the references column (For example: "Q1SalesSheet!$A$2:$F$5").
  * Click Add. It's to the right of the "All References" list box. This adds the reference and range you select to the list of references. Repeat steps 6 through 10 for all sheets and files you want to consolidate.
  * Select the row or column for the labels. Click one or both checkboxes next to "Top row" and/or "Left column" to select which row or column contains the labels.
  * Click the checkbox next to "Create links to sources" (optional). By checking this option, the consolidated data will be updated automatically if one of the source references is updated
  * Click Ok. This adds the consolidated data to the "Summary" worksheet. You can see the source data from the consolidated data by clicking the plus icons (+) to the left of the cell numbers on the left side.
  1. With your spreadsheet open, press F5 on the keyboard. The 'Go To' window will open.
  2. Click on the 'Special' button
  
  3. Click on 'Blanks' then click 'OK'
  
  4. This will select all the empty fields within your table.
  
  5. In the 'Home' ribbon, click on the arrow below the 'Delete' button then click on 'Delete Sheet Columns'
  
  6. Your empty columns have now been removed.
• B. * Open the worksheets you want to consolidate.
  * Ensure the data in each spreadsheet is listed in a consistent format. Make sure the labels on each spreadsheet are listed in a consistent format. For example, if you have the date listed in the top row, and the product listed in the left column, make sure this is the same format for each spreadsheet. Make sure the rows and columns are in the same location for each spreadsheet. Delete any blank rows or columns in the spreadsheets.
  * Open a the "Summary" worksheet.
  * Click the cell that you want the consolidated rows and/or columns to start. Click the row and/or column that is consistent with where the tables are located in the other spreadsheets.
  * Click Data. It's in the menu bar at the top of Excel. This displays the Data panel at the top of the page.
  * Click the Consolidate icon. It's the icon that resembles two sheets with a blue arrow in between them pointing to a blue third sheet. This opens the consolidate menu.
  * Select a function. Use the drop-down menu below "Function" to select the method that the data will be consolidated. For example, if you want to add all the data together, select Sum. You can also select Count, Average, Min, Max and other functions.
  * Select a reference source. This is the first spreadsheet that you want to consolidate. If you want to consolidate sheets within the same file, click the arrow icon to the right of the bar below "References".
  * Select the row or column for the labels. Click one or both checkboxes next to "Top row" and/or "Left column" to select which row or column contains the labels.
  * Click the checkbox next to "Create links to sources" (optional). By checking this option, the consolidated data will be updated automatically if one of the source references is updated
  * Click Ok. This adds the consolidated data to the "Summary" worksheet. You can see the source data from the consolidated data by clicking the plus icons (+) to the left of the cell numbers on the left side.
  1. With your spreadsheet open, press F5 on the keyboard. The 'Go To' window will open.
  2. Click on the 'Special' button
  
  3. Click on 'Blanks' then click 'OK'
  
  4. This will select all the empty fields within your table.
  
  5. In the 'Home' ribbon, click on the arrow below the 'Delete' button then click on 'Delete Sheet Columns'
  
  6. Your empty columns have now been removed.